Ready-Made Fireplace Austroflamm Tower Xtra

Height – 1317 mm
Width – 430 mm
Depth – 469 mm
Min. Power – 2.5 kW
Max. Power – 6 kW
Heatable volume – 34-88 m3

Heat-storing Heat Memory system

enables the room to be heated quickly and then store the heat for a longer period of time, after heating, the heat output is sufficient for up to 9 hours.

This is achieved by two important factors:

1. The material used has particularly good storage properties. Heat Memory, developed by Austroflamm, is a particularly heavy material (specific gravity over 3),

which is particularly good at absorbing heat and releasing it over a long period of time. This material is patented by Austroflamm.

 2. The placement of the heat-storing stones is as important as the material itself. The heat-storing stones should be placed as close to the hearth as possible. Stones placed outside the fireplace do not store enough energy. Austroflamm fireplaces have a Heat Memory storage system installed between the inner and outer casing, which ensures maximum storage.

The Heat Memory System is available for the following fireplace stoves:

Bono, Chester, Flok 2.0, Jini , Koko, Moby, Pallas, Pallas Back, Slim, Stila, Uno Back.

 

NEW: XTRA – stores even longer!

As a further development of the Heat Memory system, Austroflamm has achieved an even more efficient storage system. The XTRA combines the Heat Memory System and a special heat exchanger weighing over 100kg located at the top of the fireplace. The XTRA fireplace stove is equipped with an adjustable convection air grille, which allows the convection air to be completely closed if necessary.

The XTRA system is available for the following fireplace stoves:

Bono, Chester, Jess, Koko, Lounge, Tower, Uno, Yan and Design Fireplaces Kera and Miu.